Out of stock
SALEWA Litetrek II Tent
Salewa
$789.00
(No reviews yet)
Write a Review
Salewa
SALEWA Litetrek II Tent
A lightweight, robust and reliable, self-supporting 2-person tent for alpine trekking.
The Litetrek II is a 2-person, double wall tent, designed for lightweight trekking in alpine terrain, where protection against severe weather, wind stability, light weight and compact pack size are key. Its three-season spec is optimised for use during the milder months of the year. Wind-tunnel tested for stability at 90 km/h by the Technical University of Munich.
Its robust, reliable semi-geodesic, double wall construction puts two layers of fabric between you and the elements, enables full use of space and ensures an optimal balance of weather protection and ventilation. The 100% self-supporting design means that you can pitch without problem on rocky terrain, or at alpine sites where there is not enough space to set up with guy lines and pegs. Alternatively, the anchor points can be extended for more flexibility, for example on snowy terrain. Its very tear-resistant 50D ripstop polyester flysheet is PU-coated to give it a 3,000 mm water column, the floor is made of robust PU-coated 70D ripstop nylon that gives a 5,000 mm water column, while the 66D ripstop polyester inner tent has a mesh and mosquito net entrance. Ventilation is regulated via a rear panel with zippers (which can be operated from both inside and outside) allowing you to adjust the fresh air supply and prevent humidity.
In addition, our 3S Speed Set Up Solution with short, flat sleeves and hooks allows you to set up fast and effectively in one pitch. And in good weather or on fine nights, you can go minimalist and pitch the flysheet on its own. See also the weatherproof vestibule for gear storage and cooking, which is integrated into the inner tent, or can be extended as required.
Its robust, reliable semi-geodesic, double wall construction puts two layers of fabric between you and the elements, enables full use of space and ensures an optimal balance of weather protection and ventilation. The 100% self-supporting design means that you can pitch without problem on rocky terrain, or at alpine sites where there is not enough space to set up with guy lines and pegs. Alternatively, the anchor points can be extended for more flexibility, for example on snowy terrain. Its very tear-resistant 50D ripstop polyester flysheet is PU-coated to give it a 3,000 mm water column, the floor is made of robust PU-coated 70D ripstop nylon that gives a 5,000 mm water column, while the 66D ripstop polyester inner tent has a mesh and mosquito net entrance. Ventilation is regulated via a rear panel with zippers (which can be operated from both inside and outside) allowing you to adjust the fresh air supply and prevent humidity.
In addition, our 3S Speed Set Up Solution with short, flat sleeves and hooks allows you to set up fast and effectively in one pitch. And in good weather or on fine nights, you can go minimalist and pitch the flysheet on its own. See also the weatherproof vestibule for gear storage and cooking, which is integrated into the inner tent, or can be extended as required.
Recommended use: Mountaineering, Trekking
Features
100% Self supporting construction
Vestibule extension solution
Reinforced Hypalon sleeve finishing
Extended guy line webbing
Cord locks
Extendable and replaceable anchor points
Nylon hooks for fixing the fly even in cold conditions
Zipper with anti-catch flap
Different door opening options
Door Storage Pockets
Repair set
Footprint available
Weight & Packing size
Weight Min: 2.1Kg
Weight Max: 2.47kg
Packing Size: 40 x 19cm
Durability & stability
Tent construction: Semi geodesic double wall
Wind Protection: Minimum 90 km/h windspeed approved in the windchannel of Technical University of Munich
Fly
- Flysheet
- 50D Polyester Ripstop
- Coating Fly Sheet
- PU Coated
Watercolumn Fly: 3000mm
Floor
- Innertent
- 20D Nylon Ripstop with mesh and mosquito net entrance
- Floor
- 70D Nylon
- Coating Floor
- PU Coated
Watercolumn Floor: 5000mm
Poles
- 7001 T6 Aluminium
Pole diameter: 8.5mm
Pole quantity: 3
Pegs
- Y-Pegs Aluminium 14,5 cm
Pegs quantity10
Guy lines
- Reflective Nylon
Guy lines quantity4
Livability
Persons: 2 Persons
Entrances: 1
Vestibules: 1
Vestibule for gear storage and cooking
Ventilations: 1
Ventilation type: Ventilation panel with zippers
Height Inner Tent: 1.00m
Area Inner Tent: 2.52m²
Area Vestibules Front: 0.56m²
Tent measurements top view
Tent measurements perpective view
Set up & Adaptability
3S: Speed Set up Solution
Set up in one pitch
Coloured sleeves and poles for easy pitching
Minmalistic fast pitching solution (using only Fly)
-
-
Out of stock
-
Out of stock
-
Out of stock
