DYNAFIT Touring TLT8 Expedition CR Boot

The new TLT8 Expedition, at 1,020 grams is a true lightweight among two-buckle ski touring boots. To incorporate more speed, plus comfort and safety on the climb, the designers have paid particular attention to the new closure system Ultra Lock 4.0. Its operation is simple and intuitive, and thus saves time when transitioning from climbing to descending. The upper buckle has two functions: It operates as a lever for the ski-walk mechanism and also opens the cuff. Just like the second buckle below it, it is micro-adjustable, and therefore the fit can be customised perfectly to the foot of every ski touring enthusiast. The system is also easy to operate with gloves, and wins points for its reliability and solid workmanship with no weight penalty – for speed, no compromises. Thanks to a cuff rotation of 60 degrees, this boot enables a natural, energy-saving walking gait even on very steep terrain. A shortened toe – the so-called Speed Nose – translates into a reduction in weight of 15 percent, as well as a 12 percent more efficient roll-through by the foot with its pivot point set back by 4 mm. On the descent, the ski touring boot can be locked into a forward lean of 15 or 18 degrees. This offers a dynamic position for speedy downhills. For optimum power transfer, the fit of the TLT8 Expedition has been redesigned so the boot offers a narrow, athletic fit with a last width of 103 mm. A special feature of the TLT8 Expedition is revealed on icy, level sections or traverses on especially steep terrain when out of the binding: This ski touring boot is ideally suited for use with the new, ultralight Cramp-In crampons, developed in partnership with mountain sports brand SALEWA. CR-CUSTOM READY: Focus on materials which have a higher thermal insulation and climate management. The volume and thickness of this kind of liners are thicker and more oriented in downhill performance where the higher padding/volume gives you more support/precision and control while skiing.